Merry-go-round 2 metres
A hand-pushed merry-go-round 2 metres across, on wheels, with a central axle.
€1,985.95incl. VAT
- Parts
- 66
- Build time
- 4 days
- Level
- Medium
Classic runabout 2 m
The cut okoume plywood for a 2 metre wooden runabout with a hard-chine hull.
€1,416.95incl. 21% VAT
Made for you, ships within 10 working days
Delivered in 1 box
Shipping €18.09 for 1 box (Netherlands)
Collect in Edam: free
Rather on a pallet? Ask for it- Secure payment with iDEAL
- 14 days to change your mind
- From our own workshop
What you build
A classic-style wooden runabout, 2 metres long, with a hard-chine hull of okoume plywood: frames, bottom and side panels, decks, seat and transom. This kit is only the cut plywood; the build plan with the manual is the basis, and you are the builder.
Self-build for your own use. You buy the epoxy, glass cloth, buoyancy foam and varnish yourself; the list is below.
What is in the box
| Number of parts | 41 |
|---|---|
| Sheet material | 4 × Okoume marine ply 9 mm, 7 × Okoume marine ply 6 mm |
| Tools needed | Epoxy, brushes and mixing cups, Cutters for cable ties or copper wire, Glue clamps (at least ten), Sandpaper and sanding block, Cordless drill, Brushes for the lacquer |
| Build time | 10 to 15 days |
| Number of boxes | 1 |
2,400 × 600 mm
Technical drawing
How it goes together
Unpack
Every box is a building phase. Lay the parts out per group; their code is engraved on them.
The frame
Keel and formers, walls and bulkheads, or spokes and hub: dry-fit and square first, then glue.
Close it up
The large surfaces go on: skin, walls, deck or platform, clamped until the glue has set.
Finish
Round the edges, sand and lacquer. Then go through the safety paragraph.
Technical specifications
| Built size | 2,000 × 850 × 380 mm |
|---|---|
| Sheet size | 2,400 × 600 mm |
| Weight built | about 35 kg |
| Room to build | 4 × 2.5 m |
| Difficulty | Challenging |
| Article number | klassieke-runabout-2m |
To buy yourself
Bolts, bearings, wheels, axle, glue and lacquer are not in the kit. This is what you need, with the quantities from the design.
| Epoxy | 6 kg |
|---|---|
| Glass cloth 160-200 g/m² | as needed |
| Glass tape 50 mm | as needed |
| Microballoons and wood flour | as needed |
| Pine/spruce inwale | 2 pcs, 12 × 25 mm, 2200 mm |
| Hardwood transom pad | 1 pcs, 18 mm, doorgebout |
| Cable ties or copper wire | as needed |
| Buoyancy, closed-cell PU | 60 litres |
| Yacht varnish or paint | as needed |
Downloads
There is no sample page for this product yet.
Safety
- Self-build for your own use: the kit is cut plywood; the builder is the builder and decides whether the result is fit for use.
- Fit at least 60 litres of closed-cell buoyancy foam under the fore and aft decks.
- Maximum load: one adult.
- Sheltered inland water only, and always with a life jacket.
More from the workshop
Rescue helicopter XL
A 2 metre ride-in helicopter in 12 mm birch plywood, as a kit.
€1,003.95incl. VAT- Parts
- 32
- Build time
- 5 days
- Level
- Medium
- Parts
- 204
- Build time
- 10 days
- Level
- Challenging