Skip to content
Bouwkit
  • 2,400 × 600 mm

    This is how it comes out of the sheet

Rescue helicopter XL, build plan

Cut files, manual and parts list of the Rescue helicopter XL.

€39.00incl. 21% VAT

Instant download after payment

  • Secure payment with iDEAL
  • From our own workshop
Detail of the Rescue helicopter XL: the joints and the cut edges

What you build

Everything to cut the Rescue helicopter XL yourself or have it cut: SVG and DXF files per sheet (12 mm birch), the sheet poster, a building manual in three languages, the parts list and the hardware list.

For personal use. You buy the plywood and the hardware yourself.

What is in the box

What is in the box
Number of parts32
Sheet material6 × Birch plywood 12 mm
Tools neededWaterproof wood glue, Glue clamps (at least ten), Sandpaper and sanding block, Spanners M8 and M10, Brushes for the lacquer
Build time3 to 5 days
2,400 × 600 mm
The sheet, drawn from the cut file

Technical drawing

Technical drawing of the Rescue helicopter XL, build plan in views
The design in views, drawn from the same data as the cut files

How it goes together

  1. Unpacking: the parts of the Rescue helicopter XL laid out per group next to the boxes

    Unpack

    Every box is a building phase. Lay the parts out per group; their code is engraved on them.

  2. The frame of the Rescue helicopter XL being built

    The frame

    Keel and formers, walls and bulkheads, or spokes and hub: dry-fit and square first, then glue.

  3. The large surfaces of the Rescue helicopter XL going on

    Close it up

    The large surfaces go on: skin, walls, deck or platform, clamped until the glue has set.

  4. The Rescue helicopter XL being finished and lacquered

    Finish

    Round the edges, sand and lacquer. Then go through the safety paragraph.

Technical specifications

Technical specifications
Built size2,010 × 640 × 835 mm
Sheet size2,400 × 600 mm
Weight builtabout 26 kg
Room to build3.5 × 2.5 m
DifficultyMedium
Article numberreddingsheli-xl-bouwplan

To buy yourself

Besides the plywood you need this, with the quantities from the design.

To buy yourself
Skid bow bolt8 pcs, M8, met ring en borgmoer
Wood glueas needed
Water-based lacqueras needed

Downloads

There is no sample page for this product yet.

Licence

Personal use: you may make and use this design yourself, as often as you like, also as a gift. Selling the design, the files or the products made from it is not allowed.

Safety

  • You cut this plan yourself. Follow your laser cutter's safety instructions and never leave it running unattended.
  • This is a kit for adult builders. It is not a toy and carries no CE marking.
  • Round and sand all edges and corners smooth before the model is used.
  • Use only under adult supervision.
  • Maximum load: 35 kg. Check glue joints and bolts before every use.
  • Lacquer or paint the whole; let the finish cure completely.

Based on an open design

Silhouette based on “Helicopter Kit Card - EC 135” by soukup273 (MakerWorld), CC BY 4.0.

View the originalCC BY 4.0

More from the workshop

  • All sheets of the classic runabout with the parts on them

    Classic runabout 2 m, build plan

    The build plan of a 2 metre wooden runabout: cut files, manual and lines plan.

    €45.00incl. VATBuilding plan
    Parts
    41
    Build time
    15 days
    Level
    Challenging
  • All sheets of the Jet XL with the parts on them

    Jet XL, build plan

    Cut files per sheet thickness, manual and parts list of the Jet XL.

    €49.00incl. VATBuilding plan
    Parts
    204
    Build time
    10 days
    Level
    Challenging